Note: This post was started, but never finished, several years ago and references an event that occurred on January 1, 2017. Due to the lock-down, I have lots of time on my hands. As a result, I’m working on finishing some of the incomplete drafts.
I love fireworks. They always bring a smile to my face and are something that I find really enjoyable to photograph. Over the years, I’ve managed to get a collection of fireworks images that I am really happy with, and I’m always happy to share my go-to settings. They are iso200, f/8.0, 3.0 seconds.
In my previous post on this topic, I mention what settings I used for shooting fireworks.
Now with that shown, many people may realize that shooting through a glass window will create some really nasty reflections. So, here is what it actually looked like.
While it is certainly a lot less ‘gramable’, it works a lot better to keep the reflections down that would otherwise occur with shooting fireworks through glass. Maybe I’ll write more on this later.
With the background finished, let’s look at some of the results from each of the 3 cameras. When you get your settings just right, you don’t need a lot of changes in Lightroom, aside from whitebalance, crop, rotate.
This was my favorite photo from the night. This was also from my primary angle, shot on a Nikon D750. The reason I like this shot is because it puts you right in the action, while keeping the sense of place. This is easy enough to guess ahead of time because the fireworks show always has rockets launched from the top of the needle. Plus, since I’d seen multiple shows from this same vantage point, I could guess about where show would be and pre-position, pre-focus, and pre-setup the camera. For me, getting the framing so it felt like you were inside of the show really helps to capture the energy of the fireworks. The show is exploding outside of the frame, which makes the viewer feel like they are right in the action.
Another photo I really like from the evening was from my wider angle. Since I’d seen the fireworks displays in previous years, I was able to guess about where the top of the display would be. Normally, you wouldn’t want the top of the fireworks off, and would want to have a bit of breathing room at the top, but in this case, I think it works.
A tip: when shooting really wide, make sure to include more of the sky than you expect to use in the final image. This is because often the image will need to be rotated slightly. Rotating often includes a small crop, and you need to account for this when shooting.
For my third angle, I went with something that was more of an experiment than the others.
Based on the results of a previous year, I tried to really zoom in on one side of the Space Needle to give a new perspective.
Here is the previous year’s image on the left, and the new for 2017 image on the right.
I wanted to experiment with such a tight framing. Since I was also using an older camera and old lens that I rarely use, if the experiment failed, it wouldn’t be the end of the world.
This is a really interesting and unusual way to frame fireworks. But it is really difficult to pull off. The reason this was even possible, is because the launching point doesn’t move. When fireworks are launched from the ground into the sky, it is much more difficult to get these really tight frames. This image also works because the fireworks are exploding close to the launching point, which is also a fairly well-known landmark.
This was one of the last images from my old Sigma lens and one of the last images from my D300. At some point after this photo was taken, but, before I found it after my move, the focus ring has become difficult to turn. It was originally purchased around 2004 and was a surprisingly good example of a Sigma lens from a time when Sigma lenses were very hit or miss.
As another experiment on this post, I’m adding in a gallery of a other photos of the New Years fireworks.
no images were found